Gainda (Rhino)

Gainda (gINE-dah): The Nepali name for Rhinoceros.

The Gainda originated as an attempt to design a new Mini- while we love our mini khukuris and think they’re great little knives for slicing and carving they lack the chopping power we tend to associate with khukuris. Over the years we’ve learned quite a few tricks for how to pack power into shorter blades and left nothing on the table trying to supercharge our minis and give them full sized presence in hand. We undoubtedly succeeded- however the final blade has become a new model in the process. Rather than becoming a more powerful mini it has grown to become an absolute beast. A rhinoceros even!

We’re using very high spine thicknesses for such a short blade here to get as much mass in front of the hand as possible. The blade is also very broad- not just in the belly but also at the bolster and waist.  Aside from increasing the weight per inch of blade length it allows for a very tall bevel that preserves cutting performance at these high spine thicknesses. Distal taper is delayed until much closer to the tip ensuring we benefit fromt he full spine thickness for as long as possible without running into wedging issues near the tip. The knee is pushed forward and the tip dropped significantly to maximise the time spent at full belly width- this shape takes influence from the proportions of Budhune and north indian khukuri with lines that are influenced by our dui chirra angkhola. Again taking influence from some of these more unconventional north indian khukuri designs the cho has been minimised. Styles similar to this can be seen on 19th century karda as well as some smaller khukuris. Aside from looking unique it helps to maximise usable cutting edge on these smaller blade lengths.

The Gainda is easily the most powerful and heavy hitting khukuri in our lineup at any given blade length.  It is not the hardest hitting blade per gram though- longer, lighter blades utilise speed and weight distribution to produce more power at a lower overall weight. This speed also helps them to clear flexible brush more readily.  Their length lets them down when it comes to finer tasks though- the added length becomes clunky and your hand can sometimes get very far away from the cutting that you’re doing- not a good recipe for control. This is where the Gainda shines- it fits into packs more like a knife, carves, slices and dices more like a knife but when you gotta chop it hits like a truck.

7″: 9mm spine at bolster, 435g
9″: 9mm spine at bolster, 580g
11″: 10mm spine at bolster, 680g

Despite absolutely being in mini territory for blade length we feel that the 7″ Gainda truly hits like a 9″ or even a slimmer 10″ khukuri. At this length it is the most packable, the handiest and the most knifelike and exemplifies the core idea of the knife best- a burly camp knife and a pint sized powerhouse chopper all at the same time. In order to amplify power many historical khukuris featured the shortest handles possbile. As a result the 7″ Gainda uses the more compact handle sizing seen on our bhura and mini blades. Aside from reducing OAL it also helps trim handle weight and push the POB forwards. This handle sizing is optimised for a snug bare handed grip, with palm pressed against pommel flare and index on bolster. With this in mind consider sizing up if you are a borderline measurement, particularly if you have meaty hands or plan to use gloves. The larger blade sizes are not quite so hungry for POB or a minimal envelope and so retain regular handle sizing.  Please note that due to limited sheath area on the 7″  salyani sheaths they will feature stitched leather highlights and a dap ridge rather than patuka buttons. For both dap styles they will also feature a leather snap around the handle to ensure adequate retention and a stable carry.

The 9″ Gainda is outside of the length range where it truly excels at fiddly tasks though it still definitely does the job. However it makes up for this in power. It chops right alongside all but the most powerful 12″ khukuris and does so while being significantly handier and more compact at the same time. At this length it claws back a little bit of the brush clearing capability- just be careful with your overswings-this knife does not want to stop in a hurry. It can fill the role of a small hatchet for chopping while offering better performance at both camp tasks and brush clearing. The more powerful the user is the more they will fall in love with this knife.

If these knives are supposed to be minis then why even do an 11″ version? There’s plenty of great performing khukuris at this size already isn’t there? There absolutely are however the same tricks still work well on a more moderately sized khukuri. In fact with the extra length they almost work a little too well and we tone down some of these more intense traits to stop the blade from feeling unrefined or uncontrollable.  At this size the Gainda is of a sufficient length, weight and forward balance that it starts to struggle at these smaller tasks. It is however a truly monstrous chopper- going toe to toe with our previous benchmark 13″ Fort William MK1 khukuri and in the right hands even besting that noble blade. Smaller, less powerful users may find this blade too cumbersome for anything other than hard chopping and splitting into solid targets. Stronger and larger users will not notice these drawbacks as much and may well have found a tool uniquely well suited to them.

More than any other blade in our lineup this blade is difficult to categorise. It’s an original design so by definition it is Modern. The usage of mini khukuris is relatively modern when taken as a slice of the entire history of the blade form. However every design concept and technique used in it is very old indeed- some much older than the majority of our lineup. That all these ideas can come together across region and time to provide a fresh approach to this more modern format is something that we think is great. To help reflect this duality we offer it in both Traditional style and Modern style. The Modern Style comes with a wide, shallow but short fuller in front of the bolster- this reduces weight slightly but offers a slightly further forward POB overall. It also comes with a flat spine for firesteel sparks and other scraping tasks. On the other hand the Tradtional style keeps it classy and introduces some more traditional aesthetics including a rooftop spine and wide engraving where the fuller would usually go.

Looking for a knife as stout and powerful as a Rhino? Think about a Gainda. Whatever you do though- don’t get in it’s way 😉

Before Purchase, please read through the “Options Info” segment of our “Learn” so you can learn about Finishes, sheaths, handle materials as well as the grind types we offer and how they affect the level of warranty you’ll receive.